PC-TRUE8.jpg

TRUE TRANSPARENT

 True™ is an environmentally friendly coolant solution that alleviates stress and concern over possible leaks in your next watercooling system. It provides significant benefits of increased performance and aesthetics without the headaches. True™ delivers continuous protection against algae and corrosion and is safe for your PC components. Whether you're new to watercooling, or a seasoned pro, True™ is the coolant for you .

Fluid-Compatibility-TrueTrans.png

FEATURES

  • Repeatable chemistry for True™ colors every time.

  • Pre-measured and pre-dyed. Ready to mix with DI water and add to your system.

  • Safe on all plastics, rubbers, miscellaneous gasket materials, and acrylic.

  • 2 year shelf life (unopened in original Bottle)

  • Waterbased pre-mix concentrate solution

  • Cleanest coolant formulation in the water cooling industry.

  • Preservative and APE free.

  • Special inhibiting ingredients that prevent sludge build up of algae and galvanic corrosion.

SPECIFICATIONS

  • Bottle Size: 8 fluid ounces

  • Shelf Life: 2 years (unopened)

  • Mix Ratio: Add to 1 gallon Distilled Water

PARTS INCLUDED

  • PC Opaque - 32oz ready to use bottle

  • PrimoPrep - 2oz pH prep neutralizer

  • PrimoPrep Instructions

  • Compatibility Issues:

COMPATIBILITY

Known incompatible components include but NOT limited to:

  • Additives / Fluids: TRUE , same color only

  • Do not mix ANY additional additives, coolants or silver coils with True. This will change the formulation of True causing undesirable results.

  • Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

  • Safe to use with all rubber gaskets, acrylic tubing, pvc tubing, petg tubing, glass tubing, as well as nickel and copper components.

  • Known incompatible radiators include but NOT limited to:

    • Thermaltake RL Series - Radiators

    • EK Aluminum Kits

WARNINGS

We recommend a thorough cleaning of all tubing and system components prior to priming your system with ANY coolant. Flushing your system with Sys Prep will remove any particles as well as any residual chemicals that may exist from previous build or the tubing manufacturing process. It also neutralizes the PH balance in your loop. This is the driving force behind the success rate of TRUE. Every system is different and will have varying starting PH levels. The longer you run the SysPrep mixture in your system the better the results will be! Some systems are balanced after only a few hours while in rare cases others may take days to achieve this.

Pre-treat your system with Sys Prep to maintain the integrity of True™ and to ensure optimal results.

This product is NOT intended to be used in conjunction with other preventative additives! All ingredients are included in this product. Failure to do so might result in adverse effects and will void the warranty. PrimoChill recommends replacing the liquids every 12 months (or sooner) for best results!

Colored versions have the capability to stain your components over time. This is a common result when using any dyed coolant. The severity varies based on color, duration, and average flow rate.

Please be aware of the following before using ANY colored fluid in your system.

Preparation
All water-cooling loops (existing as well as new) must be prepared using the included Sys Prep

Maintenance
As with all custom loop water-cooling, continual maintenance and frequent inspection is required. True will need to be replaced every 6 months or sooner, depending on the complexity and conditions of your loop. This will be required to maintain the aesthetic appeal of your loop.

Compatibility
Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.
Do not mix ANY additional additives, coolants or silver coils with True. This will change the formulation of True which can cause the fluid to solidify or break apart.

Known incompatible radiators include but NOT limited to:

  • Thermaltake RL Series - Radiators

  • EK Aluminum Kits

Staining
The use of any colored fluids/dyes WILL ABSOLUTELY stain your components in your cooling loop including rigid and flexible tubing, acrylic reservoirs, and blocks. Prolonged use will cause permanent staining of your components. Severity of staining will be based on the color. Use of this product is at your own risk. PrimoChill will not replace stained components.

Color Loss
During the initial application of True, the product may change/lose its original color when added to your loop within the first 24-48 hours. This is a common, well known occurrence. If this happens to your system, immediately drain and flush it out with DI or Distilled water. Once the system has been drained and cleaned, refill your system with True fluid once again. True will over time help neutralize your cooling loop, which will then stabilize the color.

High Pressure Systems
The combination of high pressure loops and microchannel water blocks will accelerate the breakdown of True coolant. We STRONGLY recommend using a pressure relief valve in every water-cooling loop.

PrimoChill is not responsible for any hardware damage. Use at your own risk.