PC-TRUE8.jpg

TRUE OPAQUE

Opaque True is a long-awaited astounding breakthrough in showcase coolant. The solid vibrant color will set the edge on your next build and provide stunning pictures of sheer beauty to be appreciated by all. Opaque is classified as a showcase style coolant but performance is comparable to any of its transparent counterparts.

Fluid-Compatibility-Chart.png

FEATURES

  • Repeatable chemistry for True™ colors every time.

  • Pre-measured and pre-dyed. Ready to mix with DI water and add to your system.

  • Safe on all plastics, rubbers, miscellaneous gasket materials, and acrylic.

  • 2 year shelf life (unopened in original Bottle)

  • Waterbased pre-mix concentrate solution

  • Cleanest coolant formulation in the water cooling industry.

  • Preservative and APE free.

  • Special inhibiting ingredients that prevent sludge build up of algae and galvanic corrosion.

SPECIFICATIONS

  • Bottle Size: 8 fluid ounces

  • Shelf Life: 2 years (unopened)

  • Mix Ratio: Add to 1 gallon Distilled Water

PARTS INCLUDED

  • PC Opaque - 32oz ready to use bottle

  • PrimoPrep - 2oz pH prep neutralizer

  • PrimoPrep Instructions

  • Compatibility Issues:

COMPATIBILITY

Known incompatible components include but NOT limited to:

  • Additives / Fluids: TRUE Opaque , same color only

  • Do not mix ANY additional additives, coolants or silver coils with True. This will change the formulation of True causing undesirable results.

  • Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

  • Safe to use with all rubber gaskets, acrylic tubing, pvc tubing, petg tubing, glass tubing, as well as nickel and copper components.

  • Known incompatible radiators include but NOT limited to:

    • Thermaltake RL Series - Radiators

    • EK Aluminum Kits

WARNINGS

This product is intended for Experienced/Professional Users Only.

Opaque coolants are to be monitored daily to ensure that there is no color change or any collection or separation of True Opaque.

Preparation
All water-cooling loops (existing as well as new) must be prepared using the included Sys Prep

Maintenance
As with all custom loop water-cooling, continual maintenance and frequent inspection is required. True will need to be replaced every 6 months or sooner, depending on the complexity and conditions of your loop. This will be required to maintain the aesthetic appeal of your loop.

Compatibility
Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.
Do not mix ANY additional additives, coolants or silver coils with True. This will change the formulation of True which can cause the fluid to solidify or break apart.

Known incompatible radiators include but NOT limited to:

  • Thermaltake RL Series - Radiators

  • EK Aluminum Kits

Staining
The use of any colored fluids/dyes WILL ABSOLUTELY stain your components in your cooling loop including rigid and flexible tubing, acrylic reservoirs, and blocks. Prolonged use will cause permanent staining of your components. Severity of staining will be based on the color. Use of this product is at your own risk. PrimoChill will not replace stained components.

Color Loss
During the initial application of True, the product may change/lose its original color when added to your loop within the first 24-48 hours. This is a common, well known occurrence. If this happens to your system, immediately drain and flush it out with DI or Distilled water. Once the system has been drained and cleaned, refill your system with True fluid once again. True will over time help neutralize your cooling loop, which will then stabilize the color.

High Pressure Systems
The combination of high pressure loops and microchannel water blocks will accelerate the breakdown of True coolant. We STRONGLY recommend using a pressure relief valve in every water-cooling loop.

Collection or separation of particles
As with all Opaque fluids, buildup of particles in the micro channels of water blocks will occur over time. This buildup/blockage can cause the fluid in your system to flow slower and could possibly stop flow all together. System pressure also plays a role in how well True Opaque performs. The combination of high pressure loops and microchannel water blocks will accelerate the breakdown of True Opaque coolant. We STRONGLY recommend using a pressure relief valve in every water-cooling loop. If you notice ANY collection or separation of True Opaque, drain and rinse your system IMMEDIATELY. Running your system with True Opaque coolant after it has separated can cause unknown issues and could require the user to remove, open, and clean each individual component in the system.


PrimoChill is not responsible for any hardware damage. Use at your own risk.