A gallon of pre-mix is mostly water, and water is heavy, expensive to ship and available locally. An 8 oz concentrate that makes a gallon changes the economics completely, and it lets you choose your own water quality rather than inheriting whatever was bottled months ago.
True — Transparent
Low-conductive transparent concentrate. Yields a gallon. PrimoPrep included.
Why measure it
One bottle, one gallon. The colour lands the same every time.
Lower conductivity, no dissolved solids. Distilled works, but DI is the better base.
Two True colours mixed together are not a new colour.
No dyes, no biocides, no kill coils, no other coolants.
Pick a colour
- Clear
- Clear/UV Blue
- UV Blue
- Electric UV Blue
- Steel Blue
- UV Green
- UV Brite Green
- Yellow
- Red
- Blood Red
- UV Pink
- UV Purple
Get it in the loop in five steps
- 1
Prep the loop
SysPrep or System Reboot, then the PrimoPrep in the box.
- 2
Leak-test first
On plain water, before you mix anything.
- 3
Mix the whole bottle
All 8 oz into a container that holds over a gallon, then 1 gallon of DI.
- 4
Fill and bleed
Run the pump in bursts. Stop before the reservoir runs dry.
- 5
Reconnect and confirm
Reconnect the 24-pin once every joint is dry.
What it goes into, and how a fill ages
✓Use with
- DI water, or distilledDI is the better base.
- Copper, brass, nickel-plated copperThe metals True is formulated for.
- PETG, acrylic, glass, PVC tubingFully compatible.
✕Never with
- AluminumVoids the fluid warranty.
- Kill coils, other coolants, additivesTrue already carries a complete package.
- Another True colourOne colour per fill.
Day 1
Fill and bleed24 hours with the pump running. Check every fitting twice.
Week 2
First inspectionFilm, strands or a colour shift this early mean the prep was short.
6 months
Top up, inspectTop up with True. Check the radiator fins for debris.
12 months
Drain and serviceFull drain, Rad Clean through the radiators, rinse, refill.
